Videos

.375 Stalker Build

We heard a lot of buzz about the .375 Stalker so we decided to
build a rifle with the help of Fink's gunsmithing. Dave shows you
tips and tricks on building an AR. Loading for this cartridge is a
process. so if people are interested, we can do a how to load for
this cartridge in the future.

Pedersoli 1874 Sharps Q Down Under

We test smokeless powders in the Pedersoli 1874 Sharps Q Down
Under. It is a replica of the rifle used in the movie Quigley Down Under.
The movie rifle was chambered in .45-110 our rifle is chambered in .45-70.


Handloading 101

This video will teach you how to reload rifle and handgun
cartridges. Step by step you will learn how to develop your
own ammunition.


Handloading for the FN 509 Tactical

Here we discuss the FN 509 tactical pistol, handloads that
were developed and how they performed.



 





The .22 Creedmoor Handloading

a Wildcat

In our latest video, we talk about handloading the .22 Creedmoor.
We shoot this cartridge in a custom rifle from Little Crow gunsmithing.
Jeremiah takes the rifle and handloads to the range and sees how they
perform. Make sure you watch till the end there was an interesting flyer
you may want to see.

.44 Special Handloads in a Taylor & Co.

Cattleman Revolver

In This episode of Handloader TV Jeremiah will showcase the
Taylor's & Company Cattleman Standard Finish Revolver
chambered in .44 Special. We will cover the Revolver, handloads
and share with you the results of our testing.

.327 Federal Handloads In a Ruger

In this video we cover the .327 Federal Cartridge in a Ruger Single-Seven
revolver. Jeremiah showcases load development and details of the revolver.

Zero Precision Reloading Press

Jeremiah talks with Craig from Area 419 regarding their
Zero Precision Reloading Press. They explain how this press
can make precision ammunition time after time.

The Hornady Auto Change Pro

Handloader TV reviews the Hornady Auto Change Pro
precision powder measure. We use several powders and
charges through the Auto Change Pro and let you know how
it works.

The .300 Blackout Suppressed

Jeremiah loads for the .300 Blackout in two rifles. First
is an AR built by Jeremiah. This is the first rifle he built.
The second is a Bolt Action rifle. He purchased the Howa
action and stocked it himself.

Ransom Rest

A Ransom Rest has been used in several of our videos.
It is a handy tool when developing accurate handloads
for your handguns. Here we show you how to setup and use the rest.

Freedom Arms .454 Casull

We test the Freedom Arms .454 Casull using several handloads.
We worked up full power and reduced loads for this cartridge.
The revolver also came with a .45 Colt and .45 ACP cylinder.
We tested some handloads in those as well. For more information
on the .454 Casull, please check our Handloader magazine
issues 172, 189 ,232 & 316. All are still available through
Wolfe Publishing Company.

Redding Concentricity Gauge

We will be covering some of the tools in the Handloading
industry. Redding has a slant bed concentricity gauge that
can help you build better handloads. This video shows how
easy it is to use.

.380 ACP Handloads in a Browning 1911

The Browning Black Label Medallion 1911 chambered in .380 ACP
is a nice shooting lightweight pistol. We ran several handloads
through the pistol and show what worked best.

Handloading the .22-250

We shoot several handloads through a
Nosler custom M48 rifle with a Leupold scope.
Check out and see how the rifle performed with our loads.

28 Nosler Handloads

The Nosler M48 Carbon Mountain Rifle
is reviewed and taken to the range, where
we shot and tested several handloads.

The FN Five-Seven Testing Handloads

We put the FN Five-Seven to the test. We shoot several handloads
through the pistol and let you know which ones shot the best.
Overall we review the pistol and show how it performed.

Testing Handloads in the Ruger 57

This is a review of the Ruger 57. in this video we show you all
the features of the handgun and then take it to the range where
we test several handloads.

Range Closed!

This time of year in Northern Arizona we have to deal
with wind, lots of high winds. It can make accuracy testing
hard. The other day we had to close down our range, not
because of wind but a birth. Last week we actually witnessed a
Pronghorn deliver twins on our 100 yard range. Needless to say
we had to close the range down but we stood guard for Coyotes.
They stuck around for a few days and then crossed over the mountain
to get out of the wind. During this time we thought we would let
you know what is coming up next on Handloader TV while you watch
the little ones stumble around. Check out some footage of the twins
with Mom watching us watching them.

RCBS Tour, The MatchMaster

Recently we had the opportunity to visit the RCBS plant
in Oroville California. This is the final video from that tour.
During our time there we got to meet with an engineer to
discuss some of their new products. This video is all about
their MatchMaster.

Testing Handloads in the 6.5 PRC

Jeremiah discusses the Montana Rifle Company X3 rifle chambered
in 6.5 PRC. Then he takes the rifle to the range to test various handloads
developed for this cartridge.

HSM Low Recoil 6.5 Creedmoor Ammunition

From time to time we like to test factory ammunition. HSM recently released
some low recoil ammunition for the 6.5 Creedmoor. We decided to test the
ammunition through three different rifles, a Ruger, Howa, and AR-10. We
shot the AR-10 with and without a suppressor. We hope you enjoy the video.

Handloading the 5.7x28mm

This video takes you step by step through the
reloading process for this cartridge. We discuss the
coating on the brass and test several methods for
cleaning the brass.

RCBS Rebel Press and UPM 3

Recently we had the opportunity to tour the RCBS plant.
While there we did some videos on their latest products.
This is the second in a three part series. In this video we
look at their new Rebel Press and Universal Powder Measure 3.

Colt Delta Elite 10mm

In Handloader issue 200 the then Associate Editor Al Miller
lamented the demise of the 10mm. Fast forward about 20 years
to the comeback of the 10mm. In Handloader issue 314 we did a
Pet Loads article on the 10mm using a Colt Delta Elite. We used
some of these loads and others to test this Colt. Check out the
results they are quite interesting. Watch it till the end for a laugh.

RCBS Case Prep Center

Recently we had the opportunity to visit the RCBS plant
in Oroville California. During our time there we got to
meet with an engineer to discuss some of their new products.
This video is all about their Case Prep Center.

LoadData.com

LoadData.com is the ultimate online reloading manual. You
can search the powerful database by caliber, bullet weight,
powder type or any combination of the three. Below is a video
explaining how to use the site and some of the advantages.


RCBS MatchMaster

The RCBS MatchMaster is put to the test. Jeremiah shows you how
to set up the RCBS MatchMaster and runs several different powders
using the MatchMaster display and their downloadable app.


Fink's Custom Gunsmithing .280 Ackley Improved

Dave Fink of Fink's Custom Gunsmithing joins us for a conversation
regarding a .280 Ackley Improved he build for us.


Sig Sauer P320 Nitron

In this review of the Sig Sauer P320 Nitron, we go though the pistol showing how
easy it is to disassemble, switch barrels and add a suppressor. We then take it to
the range and test the original barrel, the threaded barrel without and then with the suppressor.


MK Machining Powder Funnel

We reviewed the MKM powder funnel. They said that
powder will not stick to their funnel. We decided to put it to the test.


Inline Fabrication Mounts

This is a complete review of the press mounts from
Inline Fabrication. We will go over the mounts, their installation and use.

Lyman All-American 8 Reloading Kit

This is a complete review of the . . We will go over what is included
in the kit and then use this kit to reload 10 rounds detailing the operation
of the press and the performance of the Kit.


Hornady Lock-N-Load Iron Press Reloading Kit

This is a complete review of the Hornady Lock-N-Load Iron Press Reloading Kit. .
We will go over what is included in the kit and then use this kit to reload 10 rounds
detailing the operation of the press and the performance of the Kit.


RCBS Rock Chucker Supreme Master Reloading Kit

This is a complete review of the RCBS Rock Chucker Supreme Master Reloading Kit. .
We will go over what is included in the kit and then use this kit to reload 10 rounds
detailing the operation of the press and the performance of the Kit.


Redding's Big Boss Pro-Pak

This is a complete review of Redding's Big Boss Pro-Pak.
We will go over what is included in the kit and then use this kit to reload
10 rounds detailing the operation of the press and the performance of the Kit.